Connected Distribution

×
 x 

Cart empty
Cart empty

  

 

T: + 44 (0) 1242 511133

Parasound Halo P7 Multi-Channel Preamplifier

Parasound Halo Multi-Channel Pre-amplifier (with HT Bypass).
Description

The Parasound Halo P 7 is the perfect product for those wanting the best of both worlds - discerning home theatre and the most desirable stereo, as it will satisfy the most demanding two-channel audio purist who may also enjoy multichannel music and movies. It is both a two-channel and a 7.1-channel analogue pre-amplifier with outstanding performance and an easy-to-use interface. For serious listeners who wish to use the P 7 in conjunction with their digital home theatre surround system we provide a volume control bypass mode. A sub-woofer output with analogue bass management enables your sub-woofer to be operational with two channel analogue sources.

The P7 utilises Parasound's know how in exemplary form - as it has a myriad of user friendly features. On the input section, the P7 features two multi channel (7.1) inputs for surround sound movies and music, plus seven stereo inputs (with one balanced XLR input). It also boasts a dedicated MM or MC phono input and a handy front panel 3.5mm input jack for auxiliary sources. This deft and adaptable pre-amp also excels on it's output stage with both unbalanced RCA and balanced XLR 7.1 outputs, that work in conjunction and combine beautifully with a sub-woofer output with analogue bass management.

Befitting of it's connectivity and complimentary to it's adaptability, the P7 also features a very useful serial control interface for more 'enhanced' systems or custom installations, and is also suited with three 12V trigger outputs for 3 different functions. This pedigree is further enriched by the P7's rich software features - such as it's theatre bypass mode for connecting a digital surround receiver, handy source input level matching and also headphone level offset control.

So whether the P7 is being used in the front room or if it is rack mounted in a custom installation environment - it is sure to be equally at home, whilst delivering the best possible performance that only a Parasound product can!

The Parasound Halo P7 is available in black and silver finishes - please specify on order.

Parasound Halo P7 Multi-Channel Pre-Amplifier (with HT Bypass) Features & Benefits:

2 Multi channel (7.1) inputs for surround sound movies and music
7 Stereo inputs (one balanced XLR input)
1 MM or MC phono input
Front panel input jack for portable MP3 player
Unbalanced RCA and balanced XLR 7.1 outputs
Subwoofer output with analog bass management
Serial port for RS-232 control
Rear panel IR input jack
3 different 12v trigger outputs
High quality headphone output
Relay-switched input select, mute & tone control engage/bypass
Full-featured remote control
Bass and Treble adjustable by remote
Tone controls engage/bypass by remote
Left/Right balance adjust by remote
Front/Rear balance adjust by remote
Subwoofer output level trim by remote
20 dB partial mute and full mute by remote
5 brightness settings for front panel display
Three 12V trigger outputs for 3 different functions
12V trigger can be activated by remote control
Rack mount kit available, (2 rack spaces without feet)
 
Parasound Halo P7 Multi-Channel Pre-Amplifier (with HT Bypass) Specifications:

Frequency Response:
  5 Hz - 100 kHz, +0/-3 dB
Total harmonic distortion:
  < 0.006% at 20 kHz
S/N ratio:
  > 110 dB, input shorted, IHF A-weighted
  > 95 dB, input shorted, unweighted
Cross-talk:
 85 dB at 20 kHz
Line Input Impedance:
 Unbalanced: 14.2k Ω
 Balanced: 4.7k Ω per leg
Phono Input Impedance:
 MM setting: 47k Ω
 MC setting: 100 Ω
Output Impedance:
 Unbalanced: < 60 Ω
 Unbalanced: < 60 Ω per leg
Input Sensitivity:
 200 mV for 1 V output
 Total Gain: 14 dB (Volume limiter set to 110)
 Maximum Output: 8 V (Vol. Limiter set to 110)
XLR Pin Identification:
 1 = Ground (Shield)
 2 = Positive
 3 = Negative
AC Power Requirement:
 100 - 250 V / 50 - 60 Hz (voltage is automatically selected)
 10 watts standby
 65 watts when turned on
Dimensions:
 Width: 17-1/4" (437 mm)
 Depth: 13-3/4" (350 mm)
 Height, with feet: 4-1/8" (105 mm)
 Height, without feet: 3-1/2" (89 mm)
Weight:
 Net: 13.5 lbs. (6.1 Kg)
 Shipping: 20.5 lbs. (9.3 Kg)

Parasound Halo P7 Multi-Channel Pre-Amplifier (with HT Bypass) Resources & Downloads:

Parasound Halo P7 Multi-Channel Pre-Amplifier Owners/Installation Manual

Parasound Halo P7 Multi-Channel Pre-Amplifier RS232 Codes

Parasound Halo P7 Multi-Channel Pre-Amplifier IR Hex Codes

Parasound Halo P7 Multi-Channel Pre-Amplifier IR Codes

Parasound Halo Brochure (2019)