Connected Distribution

×
 x 

Cart empty
Cart empty

 

 

 T: + 44 (0) 1242 511133

RTI - CP-16i 16 Channel Cool Power® Amplifier

RTI - CP-16i 16 Channel Cool Power® Amplifier
Array
Description

The CP-16i Audio Amplifier is ideal for discerning listeners who demand the highest quality audio in every room. Capable of delivering 100W of true audiophile-grade sound to 16 channels, the Cool Power® amplifier easily expands the reach of any audio distribution system. Engineered to perform as well as it sounds, the CP-16i features highly efficient, Class-D amplification, overload detection and a compact chassis that fits nicely into one rack space.

Perfect for residential and commercial settings, the experience is the same in every room - amazing. Put RTI technology to the test - you’ll never miss a beat.

RTI - CP-16i Sixteen Channel Power Amplifier - Key Features:

  • Sixteen channel amplifier utilizes ICEpower® audio technology.
  • Power output is 100W per channel at 4 ohms.
  • Bridgeable audio outputs for increasing power to 200W per channel.
  • Easily expands the RTI AD-4x, AD-8x and AD-16x audio distribution systems.
  • Compatible with virtually any audio distribution system.
  • Power control via voltage triggers or audio signal sense.
  • Signal Sense feature automatically powers the CP-16i on when an audio signal is detected or puts the unit is standby mode when no signal is present.
  • Voltage trigger pass-through for powering on/off additional amplifiers.
  • Thermal overload and OC (Overcurrent) monitor indicators protect the amplifier.
  • Rackmounting requires just 1RU or use included feet for free standing installation.
  • Class-D amplifier technology ensures efficient heat dissipation and low power consumption.

RTI - CP-16i Sixteen Channel Power Amplfier - Specifications:

  • - Number of Channels: 16 channels in 8 stereo zones: each zone can be bridged
  • - Output Power:
    - 100W per ch. in SE, 4Ω (1.0%THD+N, 20 Hz - 20kHz)
    - 200W per ch. in BTL, 8Ω (1.0%THD+N, 20Hz - 20kHz)
  • - Gain: (20Hz - 20kHz) 25.8dB ±0.5dB
  • - Amplifier Input: Single Ended input - 1 Vrms max Input Voltage without clipping
  • - Amplifier Output: Single Ended output stage - GND referenced- Max Output Voltage without clipping is 28Vp
  • - THD + N: 1.0%, 4Ω, SE, f=100Hz, Po=1W
  • - Dynamic Range: 110dBA SE, 115dBA BTL
  • - Idle Noise: 50uV, A-weighted, 20Hz-20kHz
  • - Upper Bandwidth, -3dB:
    100 kHz, 4Ω, SE
    120 kHz, 8Ω, SE
  • - Frequency Response: ±0.4dB, 10Hz - 20kHz, all loads
  • - Input Impedance: 47K Ω
  • - Output Serial Impedance: 30m Ω, f≤1kHz
  • - AC Mains Power: Universal Mains 100 - 240 VAC, 50 - 60Hz
  • - Fuse Rating: T6.3A_H 250V
  • - Power Connection: IEC 320 C13 power connector with 3-pole detachable power cord
  • - Environmental Operating Temperature: +32˚to +113˚F (0˚to + 45˚C)
  • - Thermal dissipation: 2 low noise fans mounted in side panels
  • - Thermal dissipation heat loss:
    0.23 W / 0.8 BTU/hr, standby
    40 W / 135.5 BTU/hr, idle, all ch.
    100 W / 341 BTU/hr, max output power, all, ch. driven
  • - AC Input Voltage: 115VAC or 240VAC (Switchable), 230W
  • - Main Power Switch: Front Panel On/Off LED
  • - Mounting: Rack mount (1RU) or free standing
  • - Dimensions (HxWxD):
      1.7 in (44 mm) x 17.25 in (438 mm) x 8.98 in (228mm)
      w/o connectors and 9.30 in (236 mm) deep with connectors
  • - Weight: 9.0 lbs (4.08 kg)
  • - Signal Sense: Audio input sense, 12V trigger and 3-5V trigger
  • - Standby Power Consumption: Less than 0.25W
  • - Warranty: Three Years (parts & labor)

NOTE: Note that the CP-16i requires an external preamp for volume control.

All features and specifications subject to change without notice.

RTI - CP-16i Sixteen Channel Power Amplifier - Resources & Downloads: