Connected Distribution


Cart empty
Cart empty



T: + 44 (0) 1242 511133

Russound DWA-MCA-88i 'Double Warranty' Speaker System Kit

Complete C-Series 8 Zone 8 Source Network Controller Amplifier with Russound Speakers & Power Amplifiers - Double Warranty Exclusive.

Save & Double The Warranty On Your MCA-88i & D250LS (2) - From 2 to 4 Years!

Special 'Double Warranty' 8 Zone 8 Source Network Controller Amplifier package featuring: 1 x MCA-88i, 2 x D250LS & 8 x IC-610 & Accessories.

The Russound MCA-88i Digital multi-zone controller amplifier provides up to eight zones of distributed audio. Scalable to 48 zones, the MCA-88i provides numerous options to tailor every room in residential or light commercial distributed audio systems.

A variety of input options have been engineered into the MCA-88i to connect up to 8 sources. AV source input options include 8 Analogue & 3 Digital (up to 3 coax, or 2 coax and 1 optical - maximum of 8 total inputs used at once). With it's digital inputs, the MCA-88i also benefits hugely from Russound's audio 'know-how' as it features three audiophile quality DACs that support high resolution audio up to 24 bit/192kHz.

These digital inputs can be perfectly utilised with Russound's advanced and professional grade MBX streamers - such as the highly adaptive MBX-PRE, to extract the best possible audio quality form any source material (hi-res or not).

The MCA-88i also has a designated Bluetooth extender connection. The Bluetooth connection allows the installation of the MCA-88i in an equipment rack while remotely locating the optional Russound BTC-1X Bluetooth receiver up to 300’ away in or near the room where the Bluetooth source will be located. Additionally, the BTC-1X improves audio quality through the high performance aptX audio codec.

All MCA products are Ethernet enabled devices allowing for IP based features and control. RIO (Russound I/O) allows Russound IP based control systems to integrate with, control, and communicate bi-directionally through an open protocol. In addition to dedicated keypads and touchscreen control options, the free My Russound App (iOS and Android) controls all Russound Ethernet connected products on the LAN including the MCA-88i and its source components. Additionally, an RS-232 port for integration with serial-connected home automation systems is available for utilization on the rear panel of the MCA-88i.

The MCA-88i features 6 zones of high quality amplification, providing 40 watts of power per channel into 8 ohms. All zones also feature useful fixed or variable line-level outputs, ideal for expanding if required into multi-channel power amplifiers for rooms/zones with more speakers. Zones 7 and 8 are for use with outboard amplification only. This system kit completes the requirement for all eight zones with the inclusion of Russound's compact but powerful D250LS amplifiers. This means that zones 7 & 8 are perfect for larger areas in a project that maybe require a bit more power than zones 1 through 6.

Advanced custom audio settings, party modes, do not disturb, source and zone linking, and all-on/all-off participation are all standard features. The MCA-88i has alarm and sleep timers, a Home Theater trigger and one 12VDC trigger output for power management and control. Being a 'controller' you can learn in IR codes of all your infra red sources (Sky Boxes, Freeview Boxes or DAB Radios for instance), so alongside your seamless control of potential Russound MBX streaming sources, the Russound MCA-88i can control all of your additional source devices too - via keypad, remote or via App!

Alongside the 'My Russound' App, the MCA-88i can be used with advanced Russound keypads or touchscreens such as the MDK-C6 or XTSPlus. The simpler SLK-1 keypad can also be used for areas where basic control is sufficient such as entry/exit areas of a home or business or any area where the My Russound App might be the predominant control interface.

As you'd expect this system is optimised with the inclusion of Russound's popular and versatile IC-610 in-ceiling speakers (or any mix of 8 pairs or single point stereo's like the Russound IC-610T's), and when paired with the desired IC-610's or IC-610T's (a pair per zone) you will also double the warranty on the complete system. So not only will you have the sonic benefits of using a Russound solution from point to point, you and your customer can benefit from extra piece of mind too!

The IC-610's are a two-way in-ceiling stereo pair featuring a 6.5" polypropylene cone driver with a movable/pivoting silk 0.75" tweeter. This combination means they will deliver warm and engaging stereo performance without the harshness of other speakers found at this price-point. They have a recommended power/operational range of 5-90 watts for optimum performance making them ideal for a host of higher quality multi-room system applications, and of course 'professional grade' audio systems - like Russound!

The speakers are finished off with new ultra low profile trim-less bezel that magnetically attaches to the speaker, making the installed speaker blend into the ceiling, for an ultra clean and uncluttered finish.

This kit is a popular choice as it saves money on buying components separately.

Note: The MCA-88i is part of the Russound Certified Installer Required Program and can only be installed and configured by a Russound Certified Installer.

Russound C-Series MCA-88i - 8 Zone 8 Source Network Controller Amplifier Features & Benefits:

8 source inputs with zone specific access
8 zones - 6 amplified, all with fixed or variable line output (80 Watts per zone)
Zones 7 & 8 perfect for larger amplification requirements or home cinema integration
Fully compatible with the 'My Russound' App for Android & iOS
RS232 and IP Controllable (Expansive control system support)
Rack mountable with Rack Mount Ears Included
6 Amplified Zones @ 40 Watts per channel
Line Out for All Zones (Fixed/Variable)
Up to 8 Line-Level Stereo Inputs, 3 Digital Coaxial and 1 Optical
6 Routed IR Outputs, plus 1 Global IR Output
Home Theater 12v Trigger In/Out for Shared Sources
Global 12v Trigger Output
Removable Screwless Speaker Connectors
Expandable to up to 48 Zones
Supports Bluetooth® with Optional BTC-1X
Paging System Support with Dedicated 12v Trigger Input
Programmable via web interface or SCS-C5 programming software
Multiple keypad options: SLK-1, MDK-C6 & XTS
Control4® Drivers Available

Russound C-Series MCA-88i - 8 Zone 8 Source Network Controller Amplifier Specifications:

Russound MCA-88i Page For Full Details (Opens in New Window)

Russound D250LS - Two Channel Power Amplifier Features & Benefits:

Switches speakers between a local source and a distributed audio system
Four mounting options available with included hardware
Low-profile design permits use in areas most amplifiers won't fit
Channels are bridgeable to create one channel with substantial power output
Robust circuitry is designed for long-term stability
12v Trigger input and output for remote on/off control
Signal sensing RCA inputs for automatic on/off operation
Can be fed via 'amplified' input - or 'Speaker' level - so ideal for bathroom TV's.
50 watts per channel into 8 ohms and 75watts per channel into 4 ohms
Bridged mono mode 150 watts of power into a single 8-ohm load

Russound D250LS - Two Channel Power Amplifier Specifications:

Russound D250LS Page For Full Details (Opens in New Window)

Russound IC-610 - 6.5" Performance In-Ceiling Speakers (Pair) Specifications:

Type: Two-way in-ceiling
Frequency Response: 50 Hz - 20 kHz
Sensitivity: 88 dB @ 1w/1m
Tweeter: 0.75" / (19 mm) Pivoting Silk
Woofer: 6.5” / (16.51 cm) Polypropylene cone
Impedance: 8 ohms
Recommended Power: 5 - 90 watts
Magnet Structure: 11 oz (0.312 kg)
Mounting Depth: 3.98" (10.1 cm)
Overall Dimensions: 9.37" (23.8 cm) diameter
Cutout Dimensions: 8.375" (21.27 cm) diameter
Sold as a stereo pair - not individually

Russound IC-610 - 6.5" Performance In-Ceiling Speakers (Pair) Resources & Downloads:

Russound IC-610 Page For Full Details (Opens in New Window)