Connected Distribution

×
 x 

Cart empty
Cart empty

  

 

T: + 44 (0) 1242 511133

Russound ISSP - ComPoint Decora In-Wall Speaker

ComPoint System Decora In-Wall(box) Speaker
Description

ComPoint can work with your multi-room audio system when you route your audio feeds (speaker cables) via the ISK1 or ISK2 keypads...or it can function as a completely stand-alone intercom. When you want the system to work as a stand-alone system, you'll need to hear paging or broadcast events on the system - so you'll need a speaker then...and the ISSP is perfect as it fits into the wall-box by the side of keypad!

The optional ISSP in-wall speaker makes this possible by working with any keypad to provide the ComPoint system's audio, for those stand-alone systems you will need the ISSP to hear paging from other rooms, door-station chimes from the ISK3 or obviously paging between rooms. Simply fit alongside your IKS1/2 keypad and 'locally' feed some speaker cables to link the two components.

You can use it for all zones or just the zones that aren't included in your multiroom system, like a hallway or basement.

The ISSP can be housed alongside your ISK1 or ISK2 keypad in a standard US 2 Gang J-Box (S2-53-RAC, S2-32-W or CADMP-2P) enabling complete ease of use with minimal 'wall-clutter'. If installed in this fashion the ISSP connects to the keypad simply and locally within the wall-box with a set of speaker cables linking the two units together. When housed like this you will also need a SWP-2 type keypad surround - that will neatly and discretely house both components.

The ISSP is available in different finishes including black (and can be housed in a stainless steel surround), but the standard finish is white.

When purchased individually it requires an SWP-1 or SWP-2 type keypad surround.

Russound ComPoint ISSP Decora In-Wall (box) Speaker Features & Benefits:

Connects to an ISK1 or ISK2 keypad in a dual-gang wall box
High-quality speaker is ideally matched to ComPoint system
Enables the ComPoint System to work as a stand-alone system
Perforated aluminum grille is acoustically transparent and stronger than plastic
Great for bathrooms, laundry areas and utilities (wet areas)
Single-gang mounting provides elegant option for intercom communications

Russound ComPoint ISSP Decora In-Wall (box) Speaker Specifications:

Device: Single-gang Decora®-style in-wall speaker*
Grille: Perforated aluminum
Driver: 1.25” x 2.5” (3.2 x 6.4 cm) water-resistant treated paper cone
Connection: Attached wire leads (speaker cables)
Power rating: 2 watts nominal, 5 watts maximum
Impedance: 8 ohms
Sensitivity: 86 dB SPL ± 3 dB at 1 watt/1 meter
Frequency response: 240 Hz – 15 kHz ± 10 dB
Dimensions(without SWP-1/2 surround): 4.2 x 10.5 x 3.6 cm (W x H x D)
Weight: 85 g

Russound ComPoint ISSP Decora In-Wall (box) Speaker Resources & Downloads:

Russound Compoint ISSP Manual

Russound Compoint System Manual

Russound Compoint System Brochure