The optional ISDR1 Door Strike Release Module provides a connection between your ComPoint system and a third-party electric door strike release (not available from Russound). This allows you to unlock the door from your ComPoint keypad.
The module connects in the CAT-5 line between the ISH1 hub and an ISK3 door station and provides relay contacts for activating a separate door strike release or gate actuator.
By providing both normally open and normally closed relay contacts, the ISDR1 can be used for other applications where a versatile relay is needed for control from a ComPoint keypad. The ISDR1 is designed for surface mounting.
To facilitate connection to a door strike release unit, it should be located in an accessible area near the required door to facilitate wiring and terminations and adjustment if required.
Russound ISDR-1 - Compoint System Door Strike Release Module Features & Benefits:
Works with most third-party door strike releases
Mounts easily and has a removable connector for simple termination
Low-cost solution for home communication, security and convenience
Can be used in any situation where a door strike release is necessary
CAT-5e Connection: 2 x 110 punch-down blocks
Removable 3-pole screw terminalrelay connector
Relay Contact Rating: 5 A @ 12 VDC
Relay Wire Size: Up to 14 AWG (1.63 mm)
Strike Release Relay: 1-pole double-throw (NC/NO)
Allows visitor access from any ComPoint keypad
Russound ISDR-1 - Compoint System Door Strike Release Module Specifications:
CAT-5 connectors: (2) 110 punch-down blocks
CAT-5 cable length: 250 ft (76 m) maximum from hub
Strike release relay: 1-pole double-throw (NC/NO)
Relay connector: Removable 3-pole screw terminal
Relay wire size: Up to 14 AWG (1.63 mm)
Relay contact rating: 5 A @ 12 VDC
Mounting method: Surface
Dimensions: 7.6 x 4.8 x 2.5 cm (W x H x D)
Weight: 136 g