Connected Distribution

×
 x 

Cart empty
Cart empty

  

 

T: + 44 (0) 1242 511133

Russound PRO-6HP - Dual Source Six Pair Impedance Matching Speaker Selector

Auto-former Based Six Pair Impedance Matching Speaker Selector
Description

The most important and most forgotten about subject in getting reliable and high quality distributed audio is arguably impedance matching...Forget these fundamentals and you will open up a host of issues!

The PRO-6HP is a robust, efficient dual-source speaker selector for up to six pairs of speakers. Designed for demanding applications, this high-quality speaker selector features a low-frequency protection circuit to reduce subsonic signals. This allows higher power operation without amplifier shutdown.

An A/B switch on the front panel allows you to power all your speakers with either of two source amplifiers. The PRO-6HP is designed for use with either 4- or 8-ohm speakers.

The PRO-6HP uses audiophile-grade autoformers for impedance matching to maintain a safe operating load at the amplifier while distributing maximum power throughout your system. A rotary switch on the rear panel sets the appropriate impedance for your amplifier, based on the number of speaker pairs connected.

Russound PRO-6HP - Impedance Matching Dual Source Six Pair Speaker Selector Features & Benefits:

Detachable snap connectors are color coded for easy wire termination
Selectable impedance matching accommodates 4- or 8-ohm speakers
Dual source capability with A/B amplified speaker inputs (with front toggle switch)
Low-frequency protection circuit helps to guard your amplifier
Audiophile-quality autoformers provide high performance for years
Power:100 watts per channel RMS continuous
Power:200 watts per channel average
Power:300 watts per channel peak
Impedance Matching: High-efficiency impedance-matching autoformers
Low-Frequency Protection: Bi-polar capacitor circuit
Wire Size: up to 12 gauge wire
Lets you control speakers in several rooms from a central location
Printed room labels included

Russound PRO-6HP - Impedance Matching Dual Source Six Pair Speaker Selector Specifications:

Connector(s): Detachable 4-pole color-coded snap connectors
Impedance Matching Type: Autoformer
Low Frequency Protection: Bipolar capacitor circuit & 6 dB high-pass filter, centered at 30 Hz
Max Wire Size: 14 AWG (1.9 mm)
Power Handling: 100 watts RMS continuous per channel & 300 watts peak per channel
Speaker Impedance: 4 ohms
Dimensions: 17” W x 2.875” H x 8.25” D (43.2 x 7.3 x 21 cm)
Weight: 7.52 lbs. (3.4 kg)

Russound PRO-6HP - Impedance Matching Dual Source Six Pair Speaker Selector Resources & Downloads:

Russound PRO-6HP - Impedance Matching Dual Source Six Pair Speaker Selector Operation Manual

Russound Amplifier Clipping Technical Tip Guideline