The Xantech Premium Video over IP (VIP) platform enables distribution of HDMI video over a 1Gb Network switch.

The XT-4K-VIP-TX and XT-4K-VIP-RX are HDCP 2.2 compliant Transmitters and Receivers that use visually lossless compression technology to deliver HDMI, Bi-directional IR, RS-232 and USB/KVM up to lengths of 100m over standard network architecture.

The XT-4K-VIP-TX/RX can be powered via PoE from a Network switch or powered locally should a switch either not be used or not support PoE.With multiple configuration options available, this Video over IP solution is ideal for both commercial and residential installations.

Key Features and Benefits

• Wizard-based installation for easy set-up and installation – basic product installation/configuration takes just seconds without needing a computer or configuration software
• No need for knowledge of networks or creating VLAN’s
• Product supports full 4K UHD input, including HDR (@24fps) up to lengths of 100m
• Exceptional image quality, virtually latency free (1 frame)
• Receiver’s built-in video scaler allows each display to use its optimal resolution
• Scales to incorporate virtually any number of transmitters and receivers
• Easy integration with all 3rd party control systems including ELAN, Control 4, Savant, Crestron, RTI, URC
• Loop-out network port enables daisy chaining receivers to extend distances
• IR control and IR pass-through control enabled
• PoE from a compatible PoE network switch can power all components within the system
• Designed to be configured with virtually any Layer 3 Gigabit network switch

Take a closer look?

Video over IP | Xantech

Xantech XT-4K-VIP-TX - Features:

• Advanced UHD video over 1Gb Network
• Virtually unlimited system size
• Connect to any supported Layer 2 / Layer 3 Managed Switch for HDMI video distribution
• Supports up to 4K HDR UHD video (3840 x 2160 @ 30Hz 4:4:4, 4096 x 2160 @ 24Hz 4:4:4, and 4K @ 60Hz4:2:0)*
• Supports all known HDMI audio formats including Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission
• Video up-scaling and down-scaling
• Features 4 operational modes:
  - Matrix distribution (Requires 1Gb network switch)
  - Video wall (Requires 1Gb network switch)
  - One-to-one HDMI extender (No network switch required)
  - One-to-many HDMI splitter (No network switch required)
• HDCP 2.2 Compliant
• Advanced EDID management
• Analogue L/R audio embedding and de-embedding on XT-4K-VIP-TX Transmitter
• Analogue L/R audio breakout on XT-4K-VIP-RX Receiver
• Bi-directional RS-232 and IR pass through
• USB 2.0 connectivity (backwards compatible with USB 1.1) for KVM and other USB devices
• PoE (Power over Ethernet) to power Xantech products from PoE switch
• Local 24V 1A power input should network switch not support PoE, sold separately
• Simple configuration via web-GUI through the XT-4K-VIP-ACM
• HDMI audio embedding supports up to 192 Khz, XT-4K-VIP-RX analogue audio output supports up to 96Khz only
• RS-232, IR and Telnet/IP integration for control of the VoIP system using Xantech XT-4K-VIP-ACM

* NOTE: HDR support is dependant on video signal bandwidth. Please see table in product manual for reference.

Xantech XT-4K-VIP-TX - Specifications:

• Video input 1 x HDMI Type A, female
• Audio input 1 x 3.5mm L/R analogue audio
• Audio output 2 x RCA L/R analogue audio
• Video output/Ethernet port 1 x LAN RJ45 connector (PoE 9W)
• USB / KVM 1 x USB, Type B
• RS-232 serial port 1 x 3-pin Phoenix connector
• IR input 1 x 3.5mm stereo jack
• IR flasher 1 x 3.5mm mono jack
• Firmware update 1 x USB Micro B
• Accessories Mounting kit included
• Dimensions (W x D x H ): 190mm x 114mm x 25mm
• Shipping weight (Kit): 0.8kg
• Operating temperature: 32°F to 104°F (0°C to 40°C)
• Storage temperature: -4°F to 140°F (-20°C to 60°C)

Xantech XT-4K-VIP-TX - Downloads:

• Xantech XT-4K-VIP-TX/RX Datasheet
• Xantech XT-4K-VIP-ACM Datasheet
• Xantech XT-4K-VIP-ACM API