Russound D1290 - Six Zone/Twelve Channel Digital Power Amplifier
More power, more efficient, more robust…just more. For 55= years Russound has been designing equipment to fit an installer’s needs. When Russound went to redesign the next generation of their ubiquitous multi-channel amplifier line, they approached it from the ground-up. The result is the D-Series, a completely custom-built solution that has all the great features of their historically popular multi-channel amps in a much more refined platform.
The Russound D1290 digital multi-channel amplifier offers the features custom installation professionals demand while offering a lighter weight, smaller chassis and more efficient Class D power. The feature-rich design of the D1290 is ideal for the demands of distributed audio systems. The D1290’s 12 channels are arranged in stereo pairs to provide discreet amplification and custom configurations for each of 6 zones.
The D-Series amplifiers all have the same legendary Russound sound quality and installer-friendly features customers have come to expect. Ultra-low distortion output (relatively unheard of in other multi-zone amplifiers) allows for clean, undistorted audio even at high listening volumes. A robust protection circuit provides efficient, safe and reliable operation under extreme conditions and protects each amplifier output channel.
The D-Series amps are even up to the rigorous demands of home theatre applications, offering 90w per channel @ 4 ohm, 45w per channel @ 8 ohm and easily transforming into a powerful 180 watt X 6 channel monster (in bridged mode).
Advanced triggering options allow the amps to operate on demand. So alongside the obvious energy efficiency, there is not even the slightest hint of amplifier hum on your speakers when the system isn’t in use.
Comes with rack ears and screws.
Russound D1290 - Six Zone/Twelve Channel Digital Power Amplifier - Features & Benefits:
High efficiency, cool running digital amplification
Zones are bridgeable to create flexible power configurations
Global bus input, independent inputs per zone
Global trigger input/output
Independent trigger input/output per zone
Audio sensing with auto-switching delay settings per zone
Class-D power compatible with Russound volume controls
Robust protection circuitry for operation under extreme conditions
Rack mountable
Russound D1650i - Eight Zone/Sixteen Channel Digital Power Amplifier - Specifications:
Power Output:
90W /Channel, 1kHz into 4 Ohms, 45W /Channel, 1kHz into 8 Ohms.
Bridged: 180W, 1kHz into 8 Ohms
Amplified Channels:
12 channels, 6 independent zones
Signal-to-Noise Ratio:
>90dB A-weighted
Frequency Response:
20Hz to 20kHz +1.7/-1dB at 1W output into 8 Ohms
Minimum Impedance:
Stereo Mode 4 Ohms, Bridge Mode 8 Ohms
Input Sensitivity:
600 mV for 80W @ 1 KHz 4 Ohm One Zone, 700 mV for 50W @ 1 KHz 8 Ohm One Zone
Input Impedance:
>22k Ohms Line Input
Trigger Inputs/outputs:
Bus In /Out. Each Zone In/Out 12VDC 100mA
Zone Line Input:
Line or Bus select switch per zone
Bridge Mode:
Select Stereo or Bridge mode per zone 8 Ohm only
Speaker Connectors:
Detachable speaker terminals support up to 14awg wire
Switching Delay:
Three settings, 5 Seconds, 5 minutes, 10 minutes
Power Requirements (International Model D850i):
220-240VAC 50Hz 600W max, IEC C14 type connector with power cords for UK.
Fuse Rating (International Model D850i):
220-230V/T2.5A, 250V Europe
Dimensions:
43.4 x 23.5 x 4.45 cm
Weight:
3.8 kg
Russound D1650i - Eight Zone/Sixteen Channel Digital Power Amplifier - Resources & Downloads:
Russound D1650i Eight Zone/Sixteen Channel Digital Power Amplifier Operation Manual
Russound D1650i Eight Zone/Sixteen Channel Digital Power Amplifier Data Sheet