Connected Distribution

×
 x 

Cart empty
Cart empty
 
 
 T: + 44 (0) 1242 511133
rsf-610t_resized2
rsg-6rw-resized31
rsf-610t-with-grill-resized9

Russound RSF-610T Single Point Stereo 6.5” Two-way In-Ceiling Speaker (Unit)

Acclaim™ Wide Dispersion Speaker Single Point Stereo 6.5" Thin Bezel In-Ceiling Speaker
Description
Clearance Sale: 8 Left Only (New).

The flexible RSF-610T is a single point stereo speaker (SPS), perfect for those areas which struggle to encompass a pair of speakers - like utility rooms, bathrooms or typically en-suites etc.

Like all the RSF range it is a 'flat-position' design - which means that the driver/woofer assembly is fixed downwards - but tweeter is housed centrally in a pivoting housing, enabling higher frequencies to be moved into a focused dispersal. This speaker is the only single point stereo speaker in the Acclaim range, and as such it is actually a bit of a hybrid in terms of its materials and performance - as it spans the mid-range performance vs price specification. Despite being very reasonably priced - it in effect should not be!

The RSF-610T is a deceptive speaker, as it features two high quality pivoting 0.75" (1.91 cm) silk tweeters on a raised baffle assembly above a 6.5" (20.32 cm) IMPP ribbed cone woofer. Both materials are not necessarily entry level, so this speaker does enable you to get great performance in smaller areas - without paying over the odds.

As it sits across the whole 6.5" Acclaim range it has a  wider power handling capacity, bridging the ability to be driven by smaller amplifiers (Like those in Russound's intuitive and easy to use A-Bus systems), with handling starting out at 5 watts, right up to higher powered systems (beefy old power amps or home cinema AVR's etc.) that take it to 120 watts - making ideal for any system.  So it is the perfect all-rounder in many respects - and balances all demands with a 'real-world' attitude of performance and price considerations.

The RSF-610T's have also been cleverly designed and optimised to enable a very wide dispersion pattern, making them fantastic for multi-room applications where you really want good stereo coverage. The RSF-610T is finished off with the Acclaim series ultra low profile trim-less bezel that magnetically attaches to the speaker, making the installed speaker blend into the ceiling, for an ultra clean and uncluttered finish.

Like all of the new series it comes with its own magnetic round grill, but remember a square grill is available separately (RSG-6S) for in-wall or even in-ceiling aesthetic considerations.

Being a single point stereo speaker it is sold individually, but it can be bought in a bulk pack too (RSF-610T-4).

Russound RSF-610T - 6.5" SPS Acclaim Thin Bezel In-Ceiling Speaker Features & Specifications:

Type: Single Point Stereo in-ceiling/in-wall
Woofer: 6.5" (16.51 cm) IMPP Cone
Tweeter: 2 X 0.75" (1.9 cm) Silk
Recommended Power: 5-120 watts
Sensitivity: 90dB @ 1w/1m
Frequency Response: 40Hz - 20kHz
Impedance: 8 ohms
Magnet Structure: 20 oz (0.567 kg)
Mounting Depth: 3.69" (9.37 cm)
Cutout Dimensions: 8.375" (21.27 cm) diameter
Overall Dimensions: 9.13" (23.19 cm) diameter
Product Dimensions: 23.2 x 9.7 x 23.2 cm
Shipping Weight: 2.3 kg
Round grille included, square grille sold separately
Sold as a single point stereo speaker - single speaker

Russound RSF-610T - 6.5" SPS Acclaim Thin Bezel In-Ceiling Speaker Resources & Downloads:

Russound Wide Dispersion & Angled Acclaim Thin Bezel In-Ceiling Speaker Loudspeaker Installation Manual

Russound RSF-610T Wide Dispersion - 6.5" Acclaim Thin Bezel In-Ceiling Speaker Product Brief

Russound Acclaim In-Ceiling Speaker Series Catalogue Brief