END OF LINE (NEW - OLD STOCK) - SRP £156.00
NOW - £120.00 (Inclusive of VAT @ 20%)
The ALTx-WIRi-2D is a wall-mounted 126-watt volume control with a built-in infrared (IR) receiver and a Decora®-style wall plate. It connects between the speaker outputs of an amplifier or receiver and a pair of speakers. The IR receiver detects signals from a hand-held remote control and relays them to the audio source equipment, allowing convenient operation from another room. This lets you sit and enjoy the music without having to get up to change the program.
Using Ultra-Match technology, the ALTx-WIRi-2D allows installers to easily match the load of multiple speaker pairs to the amplifier impedance without the need for a speaker selector or other impedance-matching equipment. All Russound volume controls are made with precision autoformers for high-fidelity sound, excellent frequency response, no heat buildup, and maximum power transfer from the amplifier to the speakers.
The IR receiver requires additional wiring, an 857 IR connecting block, IR emitters, and a 12 VDC power supply. It require a US 1 Gang J-Box for fitment (S1-18-R or S1-18-W) and also a coverplate (SWP-1), and is available in multiple finishes.
Russound ALTX-WIRI2D - In-Wall 126W Volume Control with IR Receiver Features & Benefits:
Clean design features a knob and a Decora®-style wall plate
Built-in IR receiver with status indication for infrared control of source equipment
Selects 11 steps of volume plus off
Allows impedance matching for up to 8 speaker pairs per system
Precision autoformers assure long life and superior performance
Power handling: 126W max; 42W RMS continuous (per channel)
Min. speaker impedance: 4 ohms
Impedance matching type: Auto-former based
Quick connect terminals: 4-pole screw down accepts up to 12 gauge cable
Fits neatly into S1-18-W/S1-18-R/CADMP-1P wall box/fixing
Russound ALTX-WIRI2D - In-Wall 126W Volume Control with IR Receiver Specifications:
Volume Control Component
Power Handling (/ch.): 126 watts max.; 42 watts RMS continuous
Input Impedance: Config. to1X, 2X, 4X, or 8X impedance matching
Quick Connect Terminals: Accept up to 12-gauge wire
Attenuation: 12 steps including Off; total attenuation 43 dB
Frequency Response: 20Hz - 20kHz, +1.0/-0.5 dB at rated power
Mounting: Fits most single-gang junction boxes
Dimensions: 1.625"W x 2.625"H x 2.86"D (41x66x73mm)
Weight: 1 lb. (400g)
Receive Frequency: 36kHz to 58kHz
Transmit Frequency: 40kHz to 56kHz
Range On-Axis: 55 ft. to 80 ft.
Range Off-Axis: 30 ft.
Main Power: 12VDC, 31mA max.
Status Power: 12VDC, 3mA max.
Wire Requirements: 2 twisted pair, with or without shield