Connected Distribution

×
 x 

Cart empty
Cart empty

  

 

T: + 44 (0) 1242 511133

Parasound Zamp v.3 Two Channel Amplifier

Parasound Z-Series Class A/B Two Channel Power Amplifier
Description

The Parasound Zamp v.3 is a two channel, single zone power amplifier.

Its unique half rack and compact size makes it incredibly versatile, meaning that if you require enhanced performance - but only have half the physical space - the Zamp v.3 is the perfect option for audio zones (especially in a custom installation project) that require an upgrade in sonic dexterity - or simply the best audio performance.

Parasound's Zamp v.3 is a proven amplifier, and has been designed to give you stellar reliability, amazing sound quality, and plenty of power, all in a small package. Whether you use it as a zone amplifier in a custom install project that is rack based or the centerpiece of a mini-component system, this full featured amplifier will exceed your expectations.

Depsite it's demure footprint the Zamp v.3 will deliver 45 watts of sonically superior audio quality per channel into 8 Ω, 60 watts per channel into 4 Ω or it can be used with another Zamp v.3 as a 90 watt mono amp into 8 Ω mono load (running it in bridged mono mode). It's power and unbridled fidelity at this price point (and stature) is ultimately down to it's design which encompasses fully discrete circuitry with a toroid power transformer. Despite the fact that it is a class AB amp, it's clever design and high quality internal components means that it is also a low heat amplifier - meaning that if you don't like Class D electronics (sometimes a purely personal preference amongst audiophiles), it means that you now have a truly flexible and compact alternative to use - even if you are a 'purist'.

The 'real world'  custom installation credentials as with all Zamp products are in abundance - with automatic on/off by control 9 - 12 V trigger (with loop) and also automatic on/off by audio signal with adjustable sensitivity - plus a handy ground lift switch. Level controls for each channel are rear mounted and the unit has gold-plated RCA input jacks and looping line output jacks with hefty high quality speaker terminals.

So if you are looking for a ultra-flexible but seriously great sounding single zone power amplifier (let alone an amp with such a small physical footprint), and one that can be used for a multitude of high performance custom installation situations, then you cannot look any further than the Zamp v.3 - it is a must for any serious custom installation project.

Note the Zamp v.3 products can only be rack mounted with the addition of the Parasound ZM ZRK (available separately).

The Parasound Zamp v.3 is available in black only. 

Parasound Z Series Zamp v.3 - Two Channel Amplifier Features & Benefits:

45 watts per channel into 8 Ω
60 watts per channel into 4 Ω
90 watts bridged into 8 Ω mono
Fully discrete circuitry with Toroid power transformer
Low heat design
Headphone jack
Indicators for AC present and channel operating status
Automatic on/off by 9 - 12 V trigger
Automatic on/off by audio signal with adjustable sensitivity
Level controls for each channel
Gold-plated RCA input jacks and looping line output jacks
5-way speaker terminals
Unique half-rack width chassis; 1 rack space high

Parasound Z Series Zamp v.3 - Two Channel Amplifier Specifications:

Continuous power output:
 45 watts RMS x 2, 20 Hz - 20 kHz, 8 Ω,  both channels driven
 60 watts RMS x 2, 20 Hz - 20 kHz, 4 Ω,  both channels driven
 90 watts RMS x 1, 20 Hz - 20 kHz, 8 Ω,  minimum impedance
Current capacity:
 12 amperes peak per channel
Frequency response:
 5 Hz - 100 kHz, +0/-3 dB
Total harmonic distortion:
 < 0.07 % full power
 < 0.02 % typical levels
IM distortion:
 < 0.05 %
Dynamic headroom:
 1.5 dB
Inter-channel crosstalk :
 80 dB at 1 kHz; 60 dB at 20 kHz
Input Impedance:
 33 k Ω
Input Sensitivity:
 600 mV; 1.5 V for full output
S/N Ratio:
 116 dB, input shorted, IHF A weighted
Dimensions:
 9 1⁄2" Wide
 10" Deep with connectors
 2" High with feet, 1-3⁄4" panel only
 241 x 254 x 50mm, 44.1mm panel only
Net and Shipping Weight:
 6.65 lbs., 3 kg;
 9 lbs., 4.1 kg
 
Parasound Z Series Zamp v.3 - Two Channel Amplifier Resources & Downloads:

Parasound Zamp v.3 Two Channel Amplifier Owners/Installation Manual

Parasound Zamp v.3 Two Channel Amplifier Data Sheet

Parasound NewClassic (ZZNC) Brochure 2019