The ISK3 Compoint Door Station is the 'entry' point in your system. As part of the ComPoint system, the elegant ISK3 Door Station acts as your doorbell and provides two-way communication with visitors at your door. Up to two ISK3 Door Stations can be connected on your system (one at the front door, and one at the gates by your drive - at a back entrance to the property for instance) each may have its own distinctive door chime for easy recognition.
The ISK3 Door Station includes an internal microphone with auto-matic gain control along with a built-in amplifier and speaker for reliable, high-quality two-way communication with ComPoint keypads inside the house- it also features an internal relay with screw terminals for connecting to an external doorbell if required. A subtle amber back-light makes it easy to find the doorbell button in the dark.
The ISK3 requires a special deep US style wall-box (S1-22-R) for fitment. This box can be fitted into brick or block work or even recessed into stone or timber. The ISK3 requires a single cat5e connection to the ISH1 hub, and is environmentally tested for resistance to salt water spray and ultraviolet light.
Available in an Antique brass finish.
Russound ISK3 Compoint Intercom System Door Station Features & Benefits:
A single button press rings the doorbell and allows direct communication
Visitor can reply to you without pressing the button again
Weather resistant construction for long life
Internal microphone with automatic gain control
Built-in amplifier and speaker
Internal relay for connecting to an additional doorbell
Amber backlit call key for dusk/evening use
2 x ISK3 can be fitted to a ISH1 hub (max 2 per system)
10 punchdown connector for CAT-5 cable
Fits a standard US single-gang deep wall box: S1-22-R
Russound ISK3 Compoint Intercom System Door Station Specifications:
User control: Call key with amber backlight
Audio input: Built-in microphone with automatic gain control
Amplifier: Monaural (for system functions only)
Amplifier power: 2 watts
Volume control: Installer-adjustable potentiometer
Audio output: Built-in speaker
Cover plate: Weatherproof plated die-cast zinc
CAT-5 connector: 110 punch-down block
Doorbell connector: 2-pole screw terminal
Doorbell wire size: Up to 18 AWG (1.024 mm)
Doorbell contact: 1 A @ 12 VDC
Power consumption: 15 VDC 220 mA maximum
Dimensions: 7.6 x 13.0 x 8.3 cm (W x H x D)
Wall box required: S1-22-R
Weight: 227 g